鑫志科技

You can centrally set up, configure, monitor, and manage certain Airlive devices around the clock, every day of the year, using cloud-based remote network management. This unified remote management solution helps cut costs and save time. Airlive offers an full range of access points, in-wall APs, outdoor CPEs, and mobile hotspots through AirCloud, providing a comprehensive network ecosystem.

The Airlive TOP-36BE-2.5G is an advanced Wi-Fi 7 compliant 3600Mbps Dual-Band (2.4/5GHz) multi function Access Point which features 1x 1Gbps LAN port and a 1x 2.5Gbps WAN PoE (at) input port. With a total of 4 streams, 2x2 (2.4GHz) + 2x2 (5GHz), The 2.4GHz band provides a maximum access rate of 688Mbps, 5GHz provides a maximum access rate of 2882Mbps, . With a total rate of nearly 3.6Gbps this is would be very suitable for high-density scenarios; It is supported by AirCloud and AirLive Wireless controller. Large Enterprises or organizations can centrally manage large numbers of APs in a single location with the Wireless controller. Or do the management and access from anywhere anytime with an internet connection via AirCloud, cloud-based platform. Moreover, it can work as a standalone AP at home or office when setting in FAT operation mode.

Flexible Operation - Central Management, Cloud Management, Stand-Alone AP
The AirLive TOP-36BE-2.5G can be a FIT AP or FAT AP. It can work as a standalone Access Point or as Repeater for home or small WLAN applications. For Large Enterprises or organizations, the TOP-36BE-2.5G is supported by the AirLive Wireless Controller and AirCloud with advanced and efficient central or/and cloud management.

24/7 365 Central and Cloud management for unlimited APs via AirCloud for Large Enterprises or Public Access
Cloud Control: The AirLive TOP-36BE-2.5G can be managed through the AirCloud once it has been added to the Cloud. This provides remote control from any location, making it advantageous for large networks of Access Points as local access is not necessary and support can be provided from a remote office. Additionally, multiple levels of control can be assigned in the Cloud, ranging from admin to viewer rights. Access Points can be easily added or removed at any time.

Central Management via AirLive Wireless Controller for SMB
FIT Mode: Is a setting for the TOP-36BE-2.5G Access Point that allows it to be controlled by an AirLive WLAN Access Controller. The WLAN controller manages all wireless settings, encryption, and other functions, serving as the central control hub for the TOP-36BE-2.5G Access Point. FIT mode is ideal for SMB or large enterprise setups where multiple access points need to be controlled at once. By using FIT mode and a WLAN Access Controller, it can manage all connected APs in a single location; setup time and complexity can be greatly reduced.

Works as standalone AP for Home or SOHO Office
FAT Mode: The TOP-36BE-2.5G Access Point functions as a standalone device with all wireless and encryption functions being controlled within the AP itself. This mode is more suitable for small setups like residential or offices with fewer APs. The FAT mode supports two operation modes: AP mode and AP Gateway, In AP Gateway mode, the TOP-36BE-2.5G works as a gateway and uses its WAN port connecting to a modem/router via PPPoE, DHCP, or Static IP. In AP mode, the TOP-36BE-2.5G can be connected to an existing network and work without the WAN port features.

The AirLive TOP-36BE-2.5G Wi-Fi 7 enables significantly faster speeds by packing more data into each transmission. 160MHz channels are twice the size of previous Wi-Fi generations, which is somewhat like using a semi-truck to move boxes, compared to a moving van. 4K QAM (Quadrature Amplitude Modulation) enables each signal to more densely embed greater amounts of data compared to the 1K QAM with Wi-Fi 6/6E.

Supports more efficient load balancing of traffic among links, resulting in increased throughput and enhanced reliability Normally, your wireless device picks a single channel to connect on whether it’s on the 2.4 GHz or 5 GHz band. But if there’s interference or that channel gets crowded, your connection slows down or even drops. This is where MLO comes in. Instead of limiting a wireless device to one channel, MLO allows it to use multiple channels across different bands at the same time. The result is, A stronger, faster connection that can handle network interference without any issue. MLO offers a multi-link connection function** and multi-frequency concurrency*.

The Airlive TOP-36BE-2.5G Supports Multi Resource Units (RU) and Puncturing. Multiple Resource Unit (MRU) is a new feature in Wi-Fi that’s helps reducing multiple-user latency. By providing enhanced interference mitigation and efficiency. It achieves this by selectively puncturing overlapping portions of the spectrum, ensuring data travels only on unique frequencies. MRU reduces multiple-user latency by an additional 25% compared to OFDMA alone. Puncturing: Before, busy channels meant bands could not be fully used. Data would only be sent through the primary channel. Now, with Puncturing, the interference can be blocked, opening more channels to use. It ensures reliable connectivity, faster speeds, and seamless experiences for users. (note this functions only works when the client device also supports MRU and Puncturing).

Monitoring your wireless internet usage by live stream graph, you can gain real-time insight into your network activity and make informed decisions about managing your internet resources.

Additionally, the TOP-36BE-2.5G supports Wireless Seamless Roaming technology 802.11k/802.11v and Fast BSS Transition (FT) that users can stay connected and productive while on the move. These technologies work together to allow devices to quickly and seamlessly switch between access points without interrupting the connection or requiring the user to manually reconnect. This technology is particularly useful in environments where users need to move around, such as in large offices, airports, shopping malls, and campuses.