802.11a/b/g Multi-function Wireless Access Point

Feature Summary
  • 802.11a/b/g Multi-function Wireless Access Point
  • Operate in 5GHz or 2.4GHz Frequency
  • 802.11h TPC & DFS Compliant
  • AP, Client, Bridge, Repeater, Universal, WISP, AP+Router modes
  • WPA, WEP, WPA2, Watchdog, ACK Timeout, TX power adjustable
  • 4MB Flash, 32MB SDRAM, SNMP Support
  • 802.11h TPC and DFS compliant
The AirLive WLA_5200AP is AirLive's latest multi_function 802.11a/b/g Access Point that operates in 5GHz or 2.4GHz frequency bands. It features incredible 6 wireless operation modes. Featuring the power RTL_8651B RISC processor, it is a powerful yet cost effective solution.
Operates in 5Ghz or 2.4Ghz spectrum
The AP can operate in 802.11a, b, or g mode. When it is in the 802.11a mode, it operates in the much quieter 5GHz spectrum. Comparing to other indoor 802.11a/b/g solutions, the AirLive WLA_5200AP features 802.11h compliance and firmware with adjustable ACK timing. So you can pair it with higher gain antenna and go the extra distance. AirLive further improve the 802.11a output signal from standard 12dB to 16dB for better long distance performance.
7 Mode Wireless
The WLA_5200APv2 features an incredible 7_mode firmware.
● AP Mode : The WLA_5200AP is the central hub for all your wireless devices.
● Bridge Mode : To connect 2 LANs together wirelessly.
● Client Mode : Turn the WLA_5200AP into a wireless card so you can connect with remote AP.
● WDS Repeater : To increase the wireless coverage of a WDS enabled AP/Router
● Universal Repeater : AirLive's unique universal repeater function let the WLA_5200AP extend the coverage of your AP/Router, even if your AP/Router doesn't have WDS function!
● WISP Mode : The WISP mode is similar to Client Mode. IP sharing function is added so you can share the WISP connection with many PCs.
● WISP+Universal Repeater : The WISP+Universal Repeater mode let you share WISP connection on both wireless and wired side.
● Gateway (AP+Router) : In this mode, the AP will function like wireless router. It has NAT function for IP Sharing.
ACK Timeout and TX Power Regulation
The WLA_5200AP features ACK timeout function to let you adjust the timeout value for long distance operation. In addition, mult_level TX power adjustment let you match different antennas for law compliance. The ability to set lower TX output power is also crucial if you want to match the AP with external power amplifier.
Extended Security Features
The WLA_5200AP support WEP, WPA and WPA2 security functions. In addition, WPA enterprise for 802.1x authenticator are featured for AP and WDS mode. The combination of Encryption, Hide SSID and Access Control ensures your wireless network is completely secured from intruder.
* Before configuring TX power regulation, please clean the cookies on your PC first.
Application Diagram
AP, Bridge, Client, Repeater functions
WISP Client Router mode
WISP + Universal Repeater Mode
Detachable Antenna, 2 LAN ports
802.1x, WPA, WPA2 and Web Mgt.
TX power regulation in 4 levels
Watchdog function use PING
Wireless Client Isolation (e8 firmware)
ACK Timeout Adjustment
DHCP Relay function
Flash RAM: 4MB; SD RAM: 32MB 
Ralink 802.11a/b/g RF module 
Hardware Power Booster for 802.11a
2x 10/100Mbps LAN Port
Reversed SMA Antenna Port 
Power, LAN, WLAN LED indicators
2 dBi detachable Dipole Antenna
Reversed SMA Connector
Frequency Range
  - USA (FCC) 11 Channels
  - Europe (ETSI) 13 Channels
  - USA: 12 Channels
  - Europe (ETSI) 19 Channels
Frequency Channel
  - USA (FCC): 2.412GHz~2.462GHz
  - Europe (ETSI): 2.412GHz~2.472GHz
  - U-NII
  - 5.15 5.35 GHz
  - 5.725 5.825 GHz
  - ISM
  - 5.725 5.850 GHz
  - DSRC: 5.850 5.925GHz
  - Europe (ETSI)
  - 5.47 5.725 GHz
Modulation Technique
11a Orthogonal Frequency Division Multiplexing
11g Orthogonal Frequency Division Multiplexing (64QAM, 6QAM, QPSK, BPSK)
11b Direct Sequence Spread Spectrum (CCK, DQPSK, DBPSK)
Data Rate: 54, 48, 36, 24, 18,11, 5.5, 2, 1 Mbps
Output Power
802.11b: 20dBm
802.11a: 17dBm
802.11g: 17dBm
DHCP, PPTP, L2TP, PPPoE ISP Authentication Support 
Wireless Client function as WAN 
WISP mode is not the same router mode 
To configure the WISP mode, you PC must be connected to the LAN port
802.1x Radius Support 
WPA/WPA2-PSK support
WPA Enterprise support in AP/WDS mode
Web Management and SNMP Support
WDS (Bridge, Client, Repeater) mode 
MAC Access Control 
MAC Access Table
SSID, Channel, RTS Threshold, Frag Threshold
Operating temperature: 0~60℃ 
Operating humidity (non-condensing): 20~80% 
Storage temperature: -20~65℃ 
Storage humidity: 95% Max
Power Supply
Product Weight (g)
210 g
Product Size( L x W x H (mm) )
160 x 115 x 30 mm
WLA-5200AP 802.11a/b/g Wireless Access Point
EAN Code
  13 Code 14 Code
WLA-5200AP 4719869613837 14719869613834
Standard Package
Package Type  packing box
Package Size 280 x 200 x 68 mm
Package Weight 0.75 kg
Package Content WLA-5200AP, CD-ROM, Quick Setup Guide, 12V Power adapter, Antenna, Wall mounting kit
Carton Package
Quantity 20
Dimensions 58 x 37 x 43 cm
Weight 15.4 kg